Skip to main content

Config button

Config button is a pushbutton the unit must have to enter the configuration mode or make a factory reset.

CADIO App

Config button GPIO

Select a GPIO for unit Config Button.

Config button in units with touch switches

If Switches mode is Press, You can select hold any press switch and when pressing any press switch for 5 seconds the unit will enter the configuration mode.

Config button wiring

  • Pullup

    • Config pushbutton is wired between Config button GPIO and GND.
  • Pulldown

    • Config pushbutton is wired between Config button GPIO and 3v3.
    • Pulldown resistor is wired between Config button GPIO and GND.

Config button usage

TriggerAction
ClickRestart
Hold for 3 secondsEnter configuration mode
Hold for 10 secondsFactory reset